17th Nov, 2026 Read time 7 minutes

Your Best Leading Indicator Is the Form Nobody Filled Out

By Rob Brewster, CEO, GoFormz

Picture a job hazard analysis submitted at 3:07 p.m. from the cab of a pickup truck, a mile from the site. Every box is checked. Every signature is there. On paper, it’s a perfect record.

The crew started work at 7 a.m. The hazards were real at 7 a.m. The record showed up eight hours later.

That timestamp tells you more about the health of your safety program than anything written on the form. The best safety programs I see already pay attention to it.

Every safety leader is chasing leading indicators: catch the problem before it becomes an incident. OSHA has published guidance on them. But when most teams go looking for leading indicators, they look at what’s written on the form. How many hazards were flagged. How many inspections passed. How many near misses were reported.

That’s useful. It’s also only half the story. Some of the most valuable safety data you have is sitting in how the forms get filled out: when, where, how completely, and whether they show up at all.

 

Reporting behavior is data

Silence is the easiest signal to miss. A crew that reported four near misses a month and then reports zero for six weeks is telling you something changed. Maybe a new foreman. Maybe someone got chewed out for the last report. Maybe the form got longer.

Patterns like the late JHA and the quiet crew show up before an incident. You will never see them if you only read the answers.

 

Six warning signs hiding in your submissions

Here’s what I’d watch for in any safety program:

  1. Timing drift. Pre-task forms submitted hours after work started, or end-of-week batches where daily forms should be.
  2. Silence. A crew, site, or subcontractor whose near-miss or hazard reports drop to zero.
  3. Perfect scores. Inspections that pass every item, every time. Real equipment has real wear.
  4. Copy-paste answers. The same comments, word for word, across days or crews.
  5. Empty comment fields. Required boxes get checked, and the space where someone would explain what they saw stays blank.
  6. Location mismatches. Forms completed somewhere other than the site they describe.

None of these proves anything on its own. Together, they tell you where to spend your next site visit.

 

Why crews stop reporting

When reporting drops off, the instinct is to blame the crew. In the operations I visit, the gap is almost never that crews skip safety steps. The tailboard happens. The permit gets signed. The hazard assessment gets walked. Field crews take this work seriously because they’re the ones standing next to the hazard.

What slips is the record. The talk happens before work starts, and the form gets filled out after it ends, or never. When reports show up late or stop showing up at all, the cause is usually friction or trust.

Friction looks like this. The form is six pages long. It’s on a clipboard in the truck. It has to be typed on a phone screen with gloves on, in the rain. Subcontractors don’t have a login, so they skip it or use their own paper. Every one of those obstacles turns a two-minute task into a ten-minute chore, and chores get skipped when the schedule is tight.

Trust looks like this. A worker reports a near miss, and nothing happens. Or something does happen, and it lands on them. Either way, the lesson they learn is that reporting costs them time or trouble, and gets them nothing back.

If you want more reporting, you have to fix both.

 

Lower the friction

Keep the forms your crews already know. Workers who have filled out the same JHA for ten years shouldn’t have to learn a new layout to do it digitally. Make the form work on the device in their pocket, offline, at the point of work. Let them speak their observations instead of typing them. Give subcontractors a QR code instead of a software license.

When SpawGlass made reporting easier for their crews, JSA submissions went up 60% within 30 days. Same crews, same hazards, less friction.

 

Close the loop

Every report should get a response the reporter can see. A simple practice that works: give every near-miss report a named owner and a visible status within 24 hours. Then open each week’s toolbox talk with the three most recent reports and what was done about each one, using the reporter’s name if they’re comfortable with it.

It takes five minutes. And crews who watch their last report turn into a fix are the ones who file the next one.

 

What it takes to see these signals

Here’s the hard part. You can’t watch for any of these warning signs if your forms live on paper or in flat files.

A paper JHA doesn’t tell you when it was filled out. A fillable PDF on a shared drive doesn’t tell you where. A spreadsheet doesn’t tell you which crew went quiet unless someone builds a report by hand, every week, and nobody has time for that.

To read reporting behavior, every submission needs to carry its own context: a timestamp, a location, who completed it, which fields were left blank, and which site and crew it belongs to. And that data has to flow somewhere your team can actually see it, as it comes in, without retyping.

Records like that do double duty. A leader from one of our largest customers, a global energy company with roughly 40,000 employees, told our team that OSHA audits used to be a recurring problem for them. Since moving their field reporting to digital forms, they’ve stopped being one. At Elecnor, crews hold a recorded pre-work talk every morning. As Mikel Pellitero Espinosa, a high voltage live work technician there, put it, “we can use the recordings for a legal perspective to show that everyone properly understood the work they were supposed to do.”

When the record lives on paper, producing it is a scramble. When it’s captured at the source, it’s a search. And the same data that protects you in an audit is the data that warns you before an incident.

 

Start with one question

You don’t need a new safety program to start doing this. Pick your most important pre-task form and ask one question of the last 90 days of submissions: when, where, and how completely were these filled out?

If you can answer that in five minutes, you’re ahead of most of the industry. If you can’t answer it at all, that’s your first leading indicator.

Rob Brewster is the CEO of GoFormz, a field data capture platform used by construction, energy, and field service teams to digitize the forms their crews already use.

 

 

Want to see how leading safety teams capture field data at the source?

Learn more or speak with a safety expert.


Learn more

Sponsored by GoFormz

Submit

Captured on site
Synced

 

Brands who we work with

Sign up to our newsletter
Keep up to date with all HSE news and thought leadership interviews